Atlona AT HDVS TX - Manual (Page 4)

4
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
HDMI 1
HDMI 1
HDMI 2
HDMI 2
AUDIO
IN
POWER
VGA IN
VGA
HD VIDEO OUT DC 24V
DISPLAY
ON/OFF
INPUT
SELECT
- +
FIRMWARE
AT-HDVS-TX
HDMI 1
HDMI 1
HDMI 2
HDMI 2
AUDIO
IN
POWER
VGA IN
VGA
HD VIDEO OUT DC 24V
DISPLAY
ON/OFF
INPUT
SELECT
- +
FIRMWARE
AT-HDVS-TX
Panel Description
1. DISPLAY ON/OFF button: Controls display through RS-232 when used with compatable receivers
(ex. AT-HDVS-RX)
Note: If DISPLAY ON/OFF button is held for 3 seconds the signal will reset
2. INPUT SELECT button: Use to switch between VGA and HDMI source
3. HDMI 1: Connect first HDMI source here
4. HDMI 2: Connect second HDMI source here
5. VGA IN: Connect VGA source here
6. AUDIO IN: Connect analog audio here, only available with a VGA input
7. POWER LED: Will illuminate when receiving power
8. HDMI 1 LED: Lights up when HDMI input 1 is selected
9. HDMI 2 LED: Turns on when second HDMI input is selected
10. VGA LED: Illuminates when VGA input selected
1. DC 24V: Connect included 24V2.7A power supply, with captive screw connector, here.
2. FIRMWARE: To update firmware connect mini USB to USB A cable from this port to a Windows
computer.
Note: Update instructions will be included with firmware download found on atlona.com
3. HD VIDEO OUT: Connect category cable from there to a compatible receiver. (ex. AT-HDVS-RX)
3
3
6
7
8
9
10
5 4 1
1
2
2