Atlona AT HD50SS - Manual (Page 9)

7
1
2 3 4 5 6 7 8
Sender/Receiver Unit  AT-HD50RSL
Front Panel
Rear Panel
1. Power on/off indicator
2. Input video format indicator (ON: HDMI signal / OFF: DVI signal)
3. Signal Level: Adjust the 16-level equalization control corresponding to the
transmission distance of receiving HDMI signals. For surround sound audio output,
please adjust from 0-to-7 (longest-to-shortest transmission length). For stereo
audio output, please adjust from 8-to-F (longest-to-shortest transmission length). It
is recommended to adjust from 7-to-0 or from F-to-8 to find the optimal visual
experience.
4. HDMI Signal IN: Link to AT-HD14SS, AT-HD19SS, AT-HD50SS, AT-HD50RSL, or AT-HD-
V40SS with a Cat-5/5e/6 cable.
5. Audio OUT: Plug in a local speaker
6. HDMI OUT: Local HDMI for connecting to a HDMI display with a HDMI male-male cable here
or cascade to the HDMI IN of another AT-HD50SS, AT-HD14SS, or AT-HD19SS.
7. HDMI Signal OUT: Link to AT-HD14SS, AT-HD19SS, AT-HD50SS, or AT-HD50RSL for
cascading; or link to AT-HDRS or AT-HD15SRS to a HDMI display with a Cat-5e/6 cable.
8. +5V DC: Connect to 5V 4A DC power supply.