Atlona AT HD50SS - Manual (Page 11)

9
INSTALLATION
AT-HD50SS
Extends HDMI signals to next cascading device with one local display
1. Switch off all devices, including monitors.
2. Connect a local HDMI display to the HDMI out of the AT-HD50SS and then connect a speaker
to the 3.5mm audio socket.
3. Connect to a HDMI source (such as a Blu-ray Disc player)
4. Connect AT-HD50SS to AT-HD50RSL (for cascading), to AT-HDRS (to HDTV at long range),
or AT-HD15SRS (to HDTV at mid range) via HDMI Signal Out RJ-45 port by a Cat-5e/6 cable.
5. Plug in the 5V 4A DC power supply.
6. Power on the HDTV.
7. Power on the HDMI source.
AT-HD50RSL
Relays HDMI signals to next cascading device with one local display
1. Switch off all devices, including monitors.
2. Connect a local HDMI display to the HDMI Out of the AT-HD50RSL and then connect a
speaker to the 3.5mm audio socket.
3. Connect to AT-HD50RSL via RJ-45 in by a CAT5 cable.
4. Connect to next AT-HD50RSL (for cascading), to AT-HD40RS (to HDTV at long range), or AT-
HD15SRS (to HDTV at mid range) via RJ-45 out by a CAT5 cable.
5. Plug in 5V 4A DC power supply.
6. Power on the HDTV.