American Weigh Scales (AWS) miniONYX - Manual (Page 4)

miniONYX Manual
IV. Locking & Unlocking the Scale
The scale’s touch sensitive keys can be locked and unlocked
using the three-way lock switch on the left side of the scale.
The third setting labeled “CAL” is explained in section VIII.
Calibration.
1. To unlock the scale, set the switch to the position
labeled ON. The touch keys are now functional.
2. To lock the scale, set the switch to the position
labeled OFF The touch keys are now disabled.
V. Operation
1. Place the scale on a flat, level surface and press the
ON/T key to turn the scale on.
2. Once the start-up process completes and the scale
goes to zero you are ready to weigh.
3. Place the quantity to be weighed onto the weighing
platform.
4. Wait a couple seconds for the display to stabilize
before taking a weight reading.
5. To turn the scale OFF, touch and hold the ON/T key
for 3 seconds.
VI. Changing the Unit of Measure
1. Touch the MODE key to change the scales
displayed unit of measure.
2. If the scale is turned off then back on, it will default
to the last unit used.
• OXM-600 Units: g (gram) oz (ounce) ozt (troy
ounce) dwt (pennyweight) ct (carat) gn (grain)
VII. Using the Tare Feature
You can use this scale’s tare feature to subtract the weight