American Weigh Scales (AWS) KG-10 - Manual (Page 5)

5
KG-Series Manual
2. INSTALLATION
2.1. Part List
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Weighing Pan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Stainless Steel Shroud . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
AC Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Instruction Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
Warranty Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 pc.
2.2. Unpacking
Carefully unpack the balance and remove it from its styrofoam supports. You may want to keep the original
box and packing materials for storing the balance when not in use.
If the balance is damaged contact the supplier immediately. Keep all packing materials as they were when
you received them.
2.3 Setting Up the Balance
Remove the balance from its styrofoam supports. Place the balance on a
level surface, free of vibration. Carefully set the scale platform into place.
You may want to keep the original box and packing materials for storing
the balance when not in use.
If the balance is damaged contact the supplier immediately. Keep all
packing materials as they were when you received them.
2.4 Turning on the Balance and Self-testing
1. Connect the power cord to the balance and plug the AC adapter into an
available wall socket.
2. Press the ON / OFF key to turn the scale on. A display test will be performed (5 seconds).
3. Once the display shows “0.0g” the balance is ready to use.
4. To turn the scale off, press the ON / OFF key.
NOTE: You should let the balance warm up for 20 ~ 30 minutes before use for best results.
ON/OFF UNIT TARE MODE CAL