Alto Professional STAGEDRIVE+ - Manual (Page 11)

10
The filter values can be set in the following ranges:
• Xover- Low-pass and high-pass filters.
Each Xover has 2 slightly different pages (one for each filter), where the name of the output it affects and the
type of filter shown:
• Low pass Filter - Allows all the frequencies below a specific range to pass and cuts all other frequencies
above it.
• High Pass Filter- The high-pass filter allows all the frequencies above a specific range to pass, and cuts
all other frequencies below it.
• Crossover frequency - Adjusts the filter cutoff frequency.
5-BAND FULL PARAMETRIC EQ