Denon DN-C615 - Manual (Page 14)

14
ENGLISH
(3) Detailed Description of Preset Functions
(* = initial setting)
0 1) “Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)
*01:P No=1 : Set to preset type 1.
* 01:P No=2 : Set to preset type 2.
* 01:P No=3 : Set to preset type 3.
0 2) “Program 1 OFF (ON)”
* 02:Prg 1 : Store the contents of program 1 when on. (Initial setting - OFF)
0 3) “Progam 2 OFF (ON)”
* 03:Prg 2 : Store the contents of program 2 when on. (Initial setting - OFF)
0 4) “Program 3 OFF (ON)”
* 04:Prg 3 : Store the contents of program 3 when on. (Initial setting - OFF)
0 5) “Power On (****)”
* 05:P On=Stb : Standby mode is set at specified track after TOC is read.
* 05:P On=Ply : Playback begins in the all repeat mode after TOC is read.
*05:P On=Stp : Stop mode is set after TOC is read.
0 6) “Time Mode”
*06:Time=ELA : Time display is elapsed time when power is turned on.
* 06:Time=REM : Time display is remaining time when power is turned on.
0 7) “Random ON/OFF”
*07:Rand=OFF : Playback mode is normally when power is turned on.
* 07:Rand=ON : Random playback mode is set when power is turned on.
0 8) “Finish Mode”
*08:Fin=Stop : Stop mode is set after playback ends.
* 08:Fin=Next : Standby mode is set at next track after playback ends.
* 08:Fin=Recue : Standby mode is set at playback start position after playback ends.
0 9) “Next Track Reserve”
*09:Rsv=OFF : Specified track is searched for immediately when select knob is turned during
playback.
* 09:Rsv=ON : Track to be searched for is scheduled after playback of current track ends when select
knob is turned during playback.
10) “Play Lock”
* 10:Lock=ON : Inhibit all operations other than the 1 , 3 , TIME, 2 , PITCH +, – and TITLE buttons
during playback.
*10:Lock=OFF : Enable all functions during playback.
11) “Panel Lock ON/OFF”
*11:Pane=OFF : Enable operation of all the buttons on the front panel.
* 11:Pane=OFF : Inhibit operation of all panel buttons other than those use for presetting operations
and OPEN/CLOSE button.
12) “CueDet. Level”
* 12:CDet.=–** : Set the audio detection level for cueing. (–48 / –42 / –36)
*12:CDet.=OFF : Sound startup position is not cued.
13) “CD Pitch”
*13:Pit=Norm : Play at normal speed.
* 13:Pit=+/–*.* : Play at variable speed.
±(0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8 / 3.0), 0Fix
14) “Text Display”
*14:Text=OFF : Display is set time mode when power is turned on.
* 14:Text=ON : Display is set text mode when power is turned on.
15) “Frame Display”
*15:Frm=ON : Display the frames on the time display during playback.
* 15:Frm=OFF : Do not display the frames on the time display during playback. (The frames are
displayed in the manual search, standby, pause and end monitor modes.)
16) “EOM Time”
* 16:EOM=**s : Set the EOM time. (5 / *10 / 15 / 20 / 30 / 60)
* 16:EOM=OFF : Do not use the EOM function.
17) “Sleep ON (OFF)”
*17:Sleep=** : Automatically turn the servo functions off if no button is operated for ** minutes in
the pause, standby or manual search mode. (1 / 2 / 5 / 10 / 15 / *30)
* 17:Slp=OFF : Do not automatically turn the servo functions off.
18) “IR Code”
*18:RC=DENON : Receive denon codes.
* 18:RC=RC5 : RC-5 codes can be received.
19) “IR Remote”
*19:IR=ON : Accept infrared remote control signals.
* 19:IR=OFF : Do not accept infrared remote control signals.
20) “Play Mode”
*20:Play=CON : Play mode is continuous when power is turned on.
* 20:Play=SIN : Play mode is single when power is turned on.
21) “Cascade ON/OFF”
* 21:Cas=ON : Output the cascade signal (Cascade operation possible)
*21:Cas=OFF : Do not output the cascade signal.
22) “Preset Clear (Ini. Preset)”
* 22:P Init? : Clear the presettings (set to the initial factory values).
23) “Ver = xxxx” : Display the microprocessor version. (“xxxx” is a number.)
24) “Play List”
*24:PLst=OFF : Play List does not perform.
* 24:PList=ON : MP3 is performed according to Play List.