Denon DN-C615 - Manual (Page 13)

13
ENGLISH
Preset type
Program 1
Program 2
Program 3
Power on mode
Time mode
Random
Finish mode
Next Track Reserve
Play lock
Panel lock
Auto cue
Play speed
Text display
Frame display
E.O.M.
Auto stop
RC cord
IR remote
Play mode
11 BEFORE SWITCHING OFF THE POWER
When you have finished using the CD player, before switching off the power be sure that the disc holder has been
closed with the OPEN/CLOSE (
5 ) button.
CAUTION:
• Do not forcibly close the disc holder when the power is off. It may damage the unit when it is transported.
12 PRESET FUNCTIONS AND OPERATIONS
(1) List of Preset Functions
• Functions can be preset using the buttons on the front panel. These presettings are stored in a permanent
memory, so they are not cleared even when the power is turned off.
• The functions shown on the table below can be preset. Set the functions according to the usage purpose to
efficiently achieve even higher quality playback.
• One of the preset functions can be used to display information on this set (microprocessor version).
Selection of preset type.
Setting of whether or not to play program 1.
Setting of whether or not to play program 2.
Setting of whether or not to play program 3.
Setting of operation when power is turned on.
Setting of play mode when power is turned on.
Setting of time mode when power is turned on.
Setting of operation when playback ends.
Setting of operation when select knob is turned during
playback.
Selection of whether or not to inhibit the panel switches
during playback.
Selection of whether or not to enable the panel buttons.
Setting of whether or not to perform the auto cue
operation and the audio startup level.
Standard playing speed setting.
Selection of time or text display.
Selection of whether or not to display frames.
Setting of whether or not to display the EOM and display
time setting.
Setting of whether or not to automatically stop the servo
functions.
RC cord setting.
Infrared remote control sensor setting.
Setting of play mode when power is turned on.
Preset Type 1
Program 1 OFF
Program 2 OFF
Program 3 OFF
Power On Stop
Time ELAPSED
Random OFF
Finish Stop
Reserve. OFF
Play Lock OFF
Panel OFF
CueDet. OFF
Normal Speed
Text OFF
FR Disp ON
E.O.M. 10 s
Sleep 30min
RC DENON
IR ON
Play CONTINUE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Preset function type Description
Set upon shipment
from factory
No.
Cascade
Preset clear
Set information
Play list (MP3)
Selection of whether or not to output cascade signal.
Setting for clearing presets and setting them to the initial
values.
Microprocessor version display.
Setting of whether or not to perform the play list.
Cascade OFF
Ini. Preset
Ver. **** (* = number)
Play List OFF
21
22
23
24
Preset function type Description
Set upon shipment
from factory
No.
(2) Presetting procedure
1 Press the STOP ( 2 ) button u while presetting the TITLE button @1.
2 Press the 8 or 9 button o !0 and select the preset item.
3 Press the PLAY ( 1 ) button y to change the setting.
4 The preset mode is canceled when the STOP ( 2 ) button u. The setting are writeen at this time.