Alto Professional TS115 Vibe - Manual (Page 27)

27
Appendix (English)
Technical Specifications
Transducer Low 15" woofer with 2" voice coil
Transducer High Neodymium compression driver: 1" exit with 1" voice coil
Amplification Class D, 800 W peak (670 W LF + 130 W HF)
Class D, 400 W continuous (335 W LF + 65 W HF)
Frequency Range (-10 dB): 42 Hz – 20 kHz
Frequency Response (±3 dB): 53 Hz –19 kHz
Maximum SPL @ 1 m 126 dB peak, 123 dB continuous, -6 dB
Nominal Coverage 80° / 100° H x 60° V
Active Crossover 2.5 kHz
Media Player Solid-state; loads files via USB drive or microSD card; transport and
navigation controls; ID3 tagging and folder search
Supported file formats: MP3: .mp1, .mp2, or .mp3
AAC: .m4a, .mp4, or .3gp
WMA: .wma, or .asf
Compatible disk formats: FAT16 or FAT32; 1 partition
Supported sample rates (KHz): 8, 16, 32, 11.025, 12, 22.05, 24, 44.1,
or 48
Supported bit rates (kbps): MP3, AAC: 8 – 320 or VBR
WMA: 5 – 384 or VBR
Supported characters: 0 – 9, a – z, A – Z
! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \
] ^ _ ` { | } ~
Inputs XLR (Female) + 1/4" combo inputs (x2) with independent volume controls
Input Control Line/Mic – ∞ to +50 dB
Maximum input level: +23 dBu
Input impedance: 15k
Ω
Output XLR (Male) (x1) with pre-/post-volume switch
External Controls Volume; power switch with LED indicator; clip/limit LED, ground lift switch
Protection Features Over-excursion; thermal, driver
Enclosure Trapezoidal with floor monitor capability; injection-molded polypropylene
enclosure; perforated steel grille
Mounting Integrated pole-socket (36 mm diameter); 2 handles; 5 M10-threaded
sockets (2 top, 2 bottom, 1 pullback)
Dimensions
(width x length x height) 15.2" x 16.9" x 26.8"
385 mm x 430 mm x 679 mm
Weight 40.55 lbs.
18.34 kg
* Specifications are subject to change without notice.