Installing an optional sfp+/qsfp transceiver, Sfp+/qsfp t, Nstalling – Agema AG7448CU-R User Manual
Page 15: Ptional, Ransceiver, 10gbase-cr, 10gbase-sr, 10gbase-srl, 10gbase-lrm, 10gbase-lr
- 15 -
C
HAPTER
2
|
Installing the Switch
Installing an Optioinal SFP+/QSFP Transceiver
I
NSTALLING
AN
O
PTIONAL
SFP+/QSFP T
RANSCEIVER
The SFP+ slots support the following optional SFP+ transceivers:
10GBASE-CR
10GBASE-SR
10GBASE-SRL
10GBASE-LRM
10GBASE-LR
1000BASE-SX
1000BASE-LX
Figure 11: Inserting an SFP+ Transceiver into a Slot
Figure 12: Inserting a QSFP Transceiver into a Slot
To install a SFP+/QSFP transceiver, follow these steps:
1.
Consider network and cabling requirements to select an appropriate SFP+/ QSFP
transceiver type.
2.
Insert the transceiver with the optical connector facing outward and the slot connector facing
down. Note that SFP+/ QSFP transceivers are keyed so they can only be installed in one orien-
tation.
3.
Slide the SFP+/ QSFP transceiver into the slot until it clicks into place.
QSFP+
52
60
48
56
46
44
42
40
38
36
SYS
FAN
Master
RS-232
Enthernet ACT
LNK
PSU
QSFP+
52
60
48
56
46
44
42
40