Canon DR-5010C - Manual (Page 21)

Installing the Scanner 19
Interface Cards
To connect the scanner with a SCSI connection, make sure that the SCSI card
is one of the recommended cards listed below that supports SCSI III.
SCSI Cards
When connecting the scanner via SCSI, verify that the SCSI card you are
using is one recommended for use with the scanner. The recommended SCSI
cards are as follows:
Recommended SCSI Cards
(for PCI Bus)
Manufacturer: Adaptec
Models: AHA-2930U, AHA-2940AU, ASC-19160,
ASC-29160
(for Card Bus)
Manufacturer: Adaptec
Models: APA-1480
IMPORTANT
• Follow the instructions in your computer's and the SCSI card's manuals to
install the SCSI card into your computer.
• The maximum SCSI cable length that can be used is determined by the
SCSI standard. For more information refer to the manual for the SCSI card
you are using.
USB 2.0 Interface Card
When using the USB 2.0 interface card, verify that the USB 2.0 interface card
you are using is one recommended for use with the scanner. The
recommended USB 2.0 interface cards are as follows:
Recommended USB 2.0 Interface Cards
(for PCI Bus)
Manufacturer: Adaptec
Models: USB 2 connect 2000LP (AUA-2000)
USB 2 connect 3100 (AUA-3100LP)
USB 2 connect 5100 (AUA-5100)
(for Card Bus)
Manufacturer: Adaptec
Models: USB 2 connect for Notebooks (AUA-1420)