Canon DR-5010C - Manual (Page 17)

Before Using the Scanner 15
■ Rear
CAUTION
Do not block the Ventilation Openings. Doing so could cause the
scanner to overheat, creating a risk of fire.
■ Interface
CAUTION
Do not connect anything to the connectors that are not used. If
anything is plugged into those connectors it may result in a
malfunction or a fire.
SCSI Connector
Connect to a 50-pin half-pitch
(pin type) SCSI cable. (See p. 21.)
DIP Switches
Set the SCSI ID. (See p. 22.)
Not Used
USB Connector
Connect the USB cable provided or one that
supports Hi-Speed USB 2.0. (See p. 23.)
Power Connector
Connect to the power cord.
(See p. 24.)
Ventilation
Openings
Document Eject
Tray 2
Switch the direction
documents are
eject by opening or
closing this tray.
(See p. 46.)
Interface
Ventilation
Openings