ABtUS AVS-SSR8/1-1 - Manual

Installation Guide
AVS-SSR8/1 (Universal Projector and Motorized Screen Controller)
* Specifications are subject to changes without noticfication
CONTROL: Hard button, IR Remote or Dry Contact Closure (Voltage Free)
I/O PORT: 5 X 5.0mm Screw Type Connector
(AC-N, AC-L, Common, Screen Up and Screen Down)
1x4 port 3.8mm screw type terminal block (Dry contact control)
1x3 port 3.8mm screw type terminal block (RS-232)
1x2 port 3.8mm screw type terminal block (IR)
CURRENT RATING: MAX. Load 1.8A
HOUSING: ABS
DIMENSION / WEIGHT: 89mm X 89mm X 45mm / 130g
POWER SOURCE: 220VAC to 240 VAC, 50/60 Hz
ACCESSORIES: 1 x IR Remote Controller and 1x IR probe
Technical Specifications AVS-SSR8/1
RS-232 PROGRAMMING
4. Reading and confirming the programmed projector
control code and Projector communication parameter
Header code (4 byte) + Data code length (1 byte) + Command ID (3 byte) +
Data code (2 byte).
Header code : 53H 45H 54H 52H
Data code length : 02H
Command ID : 53H 54H 53H
Data code : XXH YYH
XXH YYH => the respective code that has been programmed as followed:
(1). 50H 4EH : Projector “Power ON” RS232 Control code.
(2). 50H 46H : Projector “Power OFF” RS232 Control code.
(3). 56H 31H : Projector “Input Source-1” RS232 Control code.
(4). 50H 31H : Projector “Input source-2” RS232 Control code.
(5). 42H 55H : Projector “Communication Parameter” set code.
Example:
Eg1 : To retrieved POWER ON RS232 Control code.
Transmitted code : 53 45 54 52 02 53 54 53 50 4E
Return Code for
POWER ON
02 00 00 00 00 02
Eg 2 : To retrieved the projector Communication Parameter
Transmitted code : 53 45 54 52 02 53 54 53 42 55
Return Code for
Baud rate : 9600bps.
Data length : 8bits.
Parity : No Parity.
03 00
www.abtussingapore.com
ABtUS AVS-SSR8/1
AVS-SSR8/1 is a Universal IR Motorized Screen and Projector Controller. It can be
easily be integrated into a Home Theater, a Media Class Room, a Meeting Room
and more. It is also able to integrate with any third party central control system.
Simple integration with direct power control of 220 to 240 VAC 50Hz/60Hz.
Integrated with IR/RS-232 projector control capability in one single controller. With
the programming software, projector control can be set easily. It is also integrated
with a self-contain universal IR learning function enable the switcher to be program
to control any brand or model of projector that are out in the market.