ABtUS AV419 - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
Step-5
Step-4
Step-3
Step-6
Lock plate
Screw-A
COMPONENTS
MOUNTING
ADJUSTING THE VIEWING ANGLE
Part 1
Ceiling Plate - 1 pc
Part 4
Hook - 4 pcs
Part 2 - Connecting Pole
Assembly - 1 pc
Part 5
Lock Plate - 4 pcs
Part 3
Wall Plate - 1pc
Part 6
Hardware Kit - 3pcs
Step-1
Mount the ceiling plate (Part 1) onto ceiling by
using the M10 Expansion sleeve bolts (4x) in
(part 6) provided.
Step-2
Screw the connecting pole assembly (Part
2) into the ceiling plate (Part 1). Adjust the
connecting pole assembly to the position as
shown, secure with M6 x 6 set screws (2x)
(in Part 6).
Step-3
Fix the Wall plate (Part 3) onto the Pivot plate
with M8x15 Button Socket Cap Screw and
washers (in part 6) as shown.
Step-4
Fix Hooks (Part 4) onto Display unit with Square
Washers and Philips head screw (in Part 6).
set screw
M6 x 6
set screw
M6 x 6
Step-1
Step-2
Step-5
Lift and lower Display unit onto Wall Plate
Step-6
Lock Display unit to Wall Plate. Add pad-lock for
security, if necessary.
Screw-C
Screw-B 3.1 Tilting
Loosen screw-C, grasp the upper
and lower edge of the Display, and
then push or pull the Display to the
desired tilt angle.
Tighten both screw-B and screw-C