ABtUS AV483-L750 - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
Step-2
Step-3
Diagram A
OR
Step-1
COMPONENTS
INSTALLTION
INSTALLATION
Step 1: Insert Side Brackets (c) into Rectangular Tubes (a).
Step 2: Secure with Self Tapping screws (e) provided.
Step 3: Fix Tilt Brackets (d) onto Side Brackets (c) on left and right side with Cap screws (f),
and Washers (g).
Note: use inner hole for a closer space between wall and Plasma without tilting function
(see Diagram-A).
Step 4: Fix Hooks (b) on to back of Plasma TV with screws (i), (j) or (k)
Note: if screws provided can’t fi t, please refer to the Plasma TV user manual for the correct
mounting thread screw size.
Step 5: Fix Bracket onto Wall (not shown). Lift and hook Plasma TV on to Bracket.
Step 6: For leveling of Plasma TV, fi x screw (i) at top of Hook and level the Plasma TV by turning the
screw clockwise or anti-clockwise.
Step 7: Secure Plasma TV with Hook with screws (h) provided.
NOTE: Do consult a qualifi ed and authorized service technician if you encounter any technical
diffi culties. We are not liable for any damage or injuries arising from any improper installation or
mishandling. Now, enjoy your Plasma TV unit !!
(a)
Rectangular Tube - 2pcs (b)
Hook - 2pcs (c)
Side Bracket - 2pcs
(d) Tilt Bracket Right/Left
- 1 pc each (e) Self Tapping
Screw - 4pcs (f)
Cap Screws - 4pcs (g)
Washers - 4pcs
(h) M4 x 35 Screws - 2 pcs (i) M4 x 15 Screws
- 6 pcs (j) M5 x 15 Screws
- 4 pcs (k) M6 x 15
Screws - 4 pcs
Step-4
Step-5
Step-6
Step-7
Step-4