ABtUS AV508-D - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
PACKAGE CONTENTS
INSTALLATION
INSTALLATION
Item 1
Wall Bracket - 1 set
Item 4
Screw bag - 1 set
Item 2
Hooks - 2 pcs
Item 5
Screw bag 2 - 1 set
Item 3
Lock plate - 2 pcs
Step - 1— Marks position of the Wall Plate mounting holes.
1(a) - For concrete wall, drill and insert Wall Anchors (in Item 4) into concrete wall. Secure Wall
plate with Lag bolts and Washers provided on the wall.
1(b) - For wood stud, drill and secure Wall plate with Lag bolts and Washers provided on
wooden wall.
Note: do not use Wall Anchor for mounting on wooden wall.
Step - 2 -Fix hooks(Item-2) onto back of Plasma
with screws and Square washers (in Item-5).
Use Spacers if needed (see detail-A).
*NOTE: if screws provided can’t fi t, please refer
to the Plasma TV user manual for the correct
mounting thread screw size.
Step - 3 -Lift and Hook the Plasma with Hooks
done in Step-2 onto the Wall Bracket mounted
on the wall done in Step-1. Insert Lock Plates
(Item-3) at bottom of Hooks as shown in
Detail-B.
Step - 4 - For Cable management, remove
the End caps and slide the Side covers out of
the arms. Run cables in the space of the
front and rear arms. When done, Side covers
can be slide back or clip from the front until
hear a “click” sound. Cover back the End
caps.
Push in
Hammer
Gently
Wall anchors
Lag bolts and Washers
1(a) - for concrete wall 1(b) - for wood stud
Spacer
Detail-A
Detail-B
Lock Plate
Lift and Hook
End caps
Side covers
Cables