ABtUS AV508-DV - Manual (Page 3)

*Specifi cations are subject to changes without notice.
INSTALLATION
Step - 1 - Marks position of the Wall Plate mounting holes.
1(a) - For concrete wall, drill and insert Wall Anchors (in Item 5) into concrete wall. Secure Wall plate
with Lag bolts and Washers provided on the wall.
1(b) - For wood stud, drill and secure Wall plate with Lag bolts and Washers provided on wooden wall.
Note: do not use Wall Anchor for mounting on wooden wall.
Step - 2 - Loosen (do not remove) the top screws(2x) at hook area. Remove the bottom screws at the
curved slot hole area. Lift and unhook the Front VESA plate out of the wall arm.
1(a) - for concrete wall 1(b) - for stud wall
Lag Bolts and Washers
Wall anchors
Top screws at
the hook area
Lift and unhook
Bottom screws at the
curved slot area
Front VESA plate