ABtUS AV540 - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
INSTALLATION GUIDES: FEATURES:
Parts list
Hardware for TV Assembly
● Please read this instruction carefully before assembling.
● Fits for 26”- 42” plasma and LCD TV.
● Max. load Capacity : 30KG (66 LBS).
Assembly hardware
C-lag bolt 4pcs
D-Anchor 4pcs
E-4mm Alley key 1pc
a) M4X15 bolt 4pcs
b) M4X30 bolt 4pcs
i) M8 spacer 4pcs
c) M5X15 bolt 4pcs
d) M5X30 bolt 4pcs
j) M5/M6 spacer 4pcs
Step 1:
Remove the screws and Separate this unit
into two pieces .
Step 2:
Hold wall plate (A) against wall at desired
position , then using a pencil, mark the 3 hole
locations . Then drill holes according pencil
marks (using 2/5” or 10mm size drill bit) to a
depth of 2.4”/60mm .
If you mount TV mount into studs , fi x wall plate
(A) to the wall with screws (C).
If you are not mounting into studs, then you will
need to use wall anchors(D).
Insert wall anchors(D) into holes, you may need
to use hammer to lightly tap wall anchors into
wall . Then fi x wall plate(A) to the wall with
screws (C) .
Step 3:
Fix TV mounts to the back panel of TV.
(Figure 4)
Step 4: Hang pre-assembled TV unit on the
wall plate and pull down the strap to lock it .
(Figure 5)
e) M6X15 bolt 4pcs
f) M6X30 bolt 4pcs
k) M5/M4 washer 4pcs
Figure 3
Figure 2
Figure 4
Figure 5
Figure 1
Wood Double Stud
g) M8X20 bolt 4pcs
h) M8X40 bolt 4pcs
L) M6 washer 4pcs
1
3
2
PACKAGE CONTENTS
INSTALLATION GUIDES:
Item 1
Wall Plate - 1 pc Item 2
TV Plate - 1 pc
1
1
C
A
D
16"
40.64cm
C
1