ABtUS AV545-W2 - Manual (Page 2)

User Operation Guide
INSTALLATION
Step 2:
Mount the TV set onto the TV board using A-F bolt packed in accessories package.
Fix the screw (A-F) and Spacer (I) to the TV set mounting holes as shown in above flg.
Step 3: Putting the wall mounted TV board with screen
to the wall board
Hand the TV set mounted on the TV board (L) to the wall
board (M). Finally, put the locking bar into the matched hole.
PACKAGING CONTENT
Item
L TV Board 2 sets
Item
M Wall Board 1 set
* Specifications are subject to changes without notice. ** For detail, updated Command Code and Application Software, please visit and download from www.abtussingapore.com
Item
A Bolt M5x16 4 sets
B Bolt M5x30 4 sets
C Bolt M6x16 4 sets
D Bolt M6x30 4 sets
E Bolt M8x16 4 sets
F Bolt M8x30 4 sets
Item
I Spacer with 3 holes 4 sets
Item
J 08.5x18x1.5 Spacer 4 sets
Item
G Lag bolt St8x50 4 sets
Item
H Concrete anchor 10x40 4 sets
A to F
Item
K 08.5x18x1.5 Washer 4 sets
Step 1: Mounting the wall board to the studs
Drill holes onto the wall and put 10x40 Concrete
anchor (H) in the holes. Fit the wall board to the wall
using ST8x50 Lag bolt (G) and 08.5x18x1.5 Spacer
(J) as shown above / right fig.
Keep the bubble level aline.