ABtUS AV601-RS - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
COMPONENTS
INSTALLATION
Steps 1:
a. Wood Stud Mounting - use Stud fi nder to locate the stud. Fix the Mount on the wall (must be on the
single stud) with the Lag Bolts (e) and Washers (f) provided.
Caution: Do not use Wall Anchors (d) when mounting onto Wood Stud !!
b. Concrete Wall Mouting - drill holes and insert the Wall Anchors (d) into the concrete wall. Fix the
Mount on to the wall with the Lag Bolts (e) and Washers (f) provided.
Steps 2: Fix LCD TV/ Monitor at the front of the Mount with the M4 x 12 screws (b) provided. Use
Spacers (g) and M4 x 20 screws (c) for LCD TV/ Monitor with recessed surface (see Diagram A).
Steps 3: Remove Cover as shown in Diagram B. Run cables in the groove and fi x cover back after cable
routing is done.
NOTE: Do consult a qualifi ed and authorized service technician if you encounter any technical
diffi culties. We are not liable for any damage or injuries arising from any improper installation or
mishandling. Now, enjoy your LCD TV unit !!
(a) Mount - 1 pc (b) M4 x 12
Pen Head Screw - 4 pcs
(c) M4 x 20
Pen Head Screw - 4 pcs
(d) Wall Anchor - 2 pcs (e) Lag Bolt - 2 pcs (f) Washer - 2 pcs (g) Spacer - 4 pcs
LCD TV Monitor
Step-2
Step-3
Step-1a
Step-1b
Diagram - A
Recessed
surface
Spacers
M4 x 20
Pen Head Screws
Diagram A
Diagram B
Remove
cover
Run Cable