ABtUS AV602-TC - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
COMPONENTS ADJUSTING THE MOUNT
MOUNTING
Steps 1: Fix Camp (Item-2) onto base of Mount (Item-1) with 4x countersunk screws provided in
the hardware kit (Item-3). Clamp it onto a desk top.
Steps 2: Fix LCD Monitor with Philips head screws.
Steps 3: Adjust the LCD to your preferable heigjht and position.
NOTE: Do consult a qualifi ed and authorized service technician if you encounter any technical
diffi culties. We are not liable for any damage or injuries arising from any improper installation or
mishandling. Now, enjoy your LCD TV unit !!
Item 1
Mount - 1 pc Item 2)
Clamp - 1 pc Item 3)
Hardware Kit - 1 pc
knob
Clamp
Clamp
4x countersunk
screws
Mount
Step-3
Desk top
LCD Panel
Philips screws
Step-2
Step-1
Viewing
distance
Step-6
Step-5
Step-4
Steps 1: With the LEFT hand holding the bottom of the LCD, lifts the LCD display up slightly.
Steps 2: Disengage the gear by pressing the knob with the RIGHT hand thumb.
Steps 3: Adjust the LCD to your preferable height and release the knob until you hear a “click”
sound
Steps 4: Tilt the LCD up or down to your preferable viewing angle.
Steps 5: Adjust the viewing distance by rotating the lower arm.
Steps 6: To remove covers for cable management, press cover with right-hand thumb and remove
with the left-hand.
Step-3
Step-2
Press
Step-1
Up
LCD
remove