ABtUS AV890-610 - Manual (Page 2)

*Specifi cations are subject to changes without notice.
User Operation Guide
PACKAGING CONTENT
INSTALLATION
INSTALLATION
Item-1
Wall Arm —1 set Item - 2
Universal Mount
—1 set Item - 3
Screw bag 1 —1 set Item - 3
Screw bag 2 —1 set
Step-1 — Mark the position on the wall for the Wall Plate as shown in Diagram 1.
Note: Mounting position will be
vary dependent on the Brand
and Model of Projector used.
Please refer to Projector User
Manual for installation details.
To find dimention A-1,
A-1 = (offset distance) - 6.15cm
To find dimention A, align Top
of image to the edge Screen or
refer to Projector User Manual
for details.
Step-3 — Mount Wall Arm (Item 1
) onto wall by using the Lag Bolts
and Washers (in Item 4) provided.
Step-4 — Fix Universal Mount (Item 2
) with Base Spacer (“M” in Item 3) and
Screws (“A” -”I” in Item 3) onto Hitachi
projector.
Step-5 — Lift and insert the assembled
projector (in Step-4) into the short
pipe adaptor of the Wall Arm. Insert
the Locking L-bracket (in Item 4) and
secure with M8 socket cap screw and
nut (in Item 4).
A-1
A
Hammer
Gently
Push in
Centre Line
of Wall Plate
Lens
Offset distance
Centre line of Image/
Projector Lens
Top of Image
CG of
Projector
Step-2 — Marks position of the Wall Plate mounting holes. Drill and insert Wall Anchors (in Item 4)
into concrete wall. Note: Do not use Wall Anchor for mounting on wooden wall.
Holes for
concealed cables
markings
Lag bolts and
Washers
Base
Spacer
Universal
Mount
Projector
insert
insert
Locking
L-bracket