DirecTV D11 - Manual (Page 75)

Chapter 4
Section Title
65
FCC Customer Information
Th is equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the back of this equip-
ment is a label that contains a product identifi er in the format US:AAAEQ##TXXXX. If requested, this information must be
provided to your telephone company. Th is equipment uses the following USOC Jack: RJ11C. A plug and jack used to con-
nect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed
to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
Th e REN is used to determine the number of devices that may connect to a telephone line. Excessive RENs on a telephone
line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of the RENs
should not exceed fi ve (5.0).
To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact your local
telephone company. Th e REN for this product is part of the product identifi er that has the format US: AAAEQ##TXXXX.
Th e digits represented by ## are the REN without the decimal point (e.g., 03 is a REN of 0.3).
If this DIRECTV Receiver causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify
the customer as soon as possible. Also, you will be advised of your right to fi le a complaint with the FCC if you believe it
is necessary.