MIPRO mr515(2ce095) - Manual (Page 2)

This system includes the following accessories:
(5) DC 12V Input Jack: To connect 1 2 V DC fromthe AC/DC adapter.
(6) Unbalanced Audio Output Jack: With 1/ 4" Phone Jack provides audio
output signal from this jack to the amplifier.
(7) Unbalanced LevelSwitch: "MIC" selection is for "Microphone-level"
outpu t.
"AUX" selectio n is fo r "Line-out" le vel output. A
(8) Squelch Adjusters: Adjust the squelch level to eliminate the RF noise
interference at receiver stand-bystate.
(9) Antenna Input Connectors: For rear Antenna Placement.
- 1 - - 2 -
(2)
(2)
(1)
POWER
POWER
(3)
(3)
(4)
(4)
Antenna in rear
(5)
(5)
(6)
(6)
(9) (8)
(8)
(7)
(7)
+ -
+ -
MIC
MIC
AFOUTPUT
AFOUTPUT
AUX
AUX
S Q
S Q
LEVEL
LEVEL
A N T
Thank you for selecting half 19-inch unit non-diversity
wireless receiver system. Before operating please read this instruction
manual carefully and thoroughly i n order to attain the correct operating
procedures and achieve the best results.
This system is divided into single channel receiver with matching one
microphones and individual volume controls. This system is also
equipped with "PILOTONE" and the latest "NOISE LOCK" dual-squelch
circuit, and provides the efficacy for eliminate the random noise
interference when the receiver is at standby state.
MIPRO
WIRELESS RECEIVER
① × AudioOutputCable 1
③ × Antenna 2
② × Instruction Manual 1
④ × AC/DCAdapter 1
A. Front Panel
1. Parts Name and Functions
Antenna in front
(Fig.1)
(1) Antenna Input Connector: For Front AntennaPlacement.
(2) Power Switch & Indicator: When switch is turned on, red indicator
illuminates to denote normal power status.
(3) RF Signal Indicator: Indicates receiving transmitting R F s i gnals.
(4) Audio signal Indicator:Indicates the microphone signal.
B. Rear Panel
Antenna in rear
Antenna in front
(Fig.2)