Dual XDVD1002CM - Manual (Page 14)

14 15
XDVD1002CM OPERATION
CD Operation
Press SOURCE on the remote or the main unit to select DVD mode.
Press EJECT on the remote control or  on the main unit to open the motorized
disc slot, insert disc.
Press EJECT on the remote control or  on the main unit to eject the disc.
Press 
on the remote control to stop playback and retain last position memory.
Press II on the remote or main unit to restart playback from the last position.
Press

twice to stop all playback without last position memory.
Press

, then press II to restart playback from the beginning.
Press II on the remote or main unit to temporarily stop playback.
Press II again to resume playback.
Press I on the remote or main unit to skip to the beginning of the next track.
Press I to return to the beginning of the current track. Pressing I again
skips to the beginning of the previous track.
Press GO TO on the remote to show “GO TO _ _:_ _".
Using 0~9, enter the desired track time in minutes and seconds.
Press ENTER to confirm.
Press I or I on the main unit for more than 2 seconds to fast forward FF 2X,
4X, 8X, 16X or reverse FR 2X, 4X, 8X, 16X a track. Press 
II to cancel.
Press  or  on the remote to fast forward FF 2X, 4X, 8X, 16X or reverse FR 2X,
4X, 8X, 16X a track. Press 
II to cancel.
Press REPEAT on the remote once to repeat the entire disc. Press REPEAT twice to
repeat the current track. Press
REPEAT three times to cancel repeat function.
Press A-B on the remote for more than 2 seconds to set point “A”.
Press A-B on the remote for more than 2 seconds to set point “B”.
The points between “A” and “B” will continually repeat.
Press A-B on the remote to cancel repeat A-B.
Press PROGRAM on the remote to access the program mode. Enter the
desired Title and Chapter using 0-9 on the remote
control. Press II to begin programmed playback.
Press DISPLAY on the remote to select between the following:
SINGLE ELAPSED --:--:--
SINGLE REMAIN --:--:--
TOTAL ELAPSED --:--:--
TOTAL REMAIN --:--:--
OFF
CD Mode
Insert Disc
Eject Disc
Stop/Start
Play/Pause
Track Select
Direct Time Select
Fast Forward and Reverse
Repeat
Repeat A-B
Program Mode
Display Status