Optoma DC300i - Manual (Page 9)

9
REMOTE CONTROL.. Continued
14. VIDEO MODE: General default Visualiser setting.
15. Page +, Page -: Used in conjunction with button 16 Recall. After pressing Recall, any stored
images will be displayed. Button 15 allows you to scroll through the images.
16. Recall: Image recall mode enabled, display the saved images (also see item 15)
17. Bright +: Image brightness control +
18. Bright -: Image brightness control -
7. VISUALISER OR VIDEO MODE ?
Visualiser Mode
The DC300i defaults to visualiser mode each time the unit is turned on. This is the
preferred mode for most applications. The DC300i can view & record video in this
mode at 12 FPS (frames per second). At 12 fps you may notice slight ghosting of the
video image. If smooth video recording is required then switch to Video Mode.
Video Mode
In video mode the camera provides smooth video viewing & recording at 22 fps. It’s an
ideal setting for active subjects.
CHANGING THE MODE ON THE
VISUALISER BASE
To change from the default visualiser
mode into fast video mode locate the
centre control button and change as
required.
CHANGING THE MODE USING
THE REMOTE CONTROL
To change from the default visualiser
mode into fast video mode locate the
left button and change as required.