Optoma HD90 - Manual (Page 45)

45
English
User Controls
SETUP |
HDMI Link
Settings
Using HDMI Link
When you connect HDMI CEC-compatible devices to the projector with
y
HDMI cables, you can control them on same Power On or Power Off sta-
tus using the HDMI Link control feature on the projector’s OSD.
This lets one device or multiple devices in a group Power On or Power Off
y
via HDMI Link Feature.
In a typical configuration, your DVD player may be connected to the pro-
y
jector through an amplifier or home theater system.
HDMI Link
SETUP | HDMI Link Settings
Inclusive of TV
Power On Link
Power Off Link
Exit
On
IMAGE
DISPLAY
SYSTEM
SETUP
Yes
Device -> PJ
Off
When HDMI Link ™
is set to Off, the
standby mode is
<0.5W.
HDMI
Amplifier
HDMI
DVD Player
HDMI Link
Enable/Disable the HDMI Link function. The Inclusive TV, Power
on Link, and Power off Link options will only available if the setting
is set to On.
Inclusive of TV
If the setting is set to “Yes”, both TV and projector will be auto-
matically turned off at the same time. To prevent both devices to
be turned off at the same time, set the setting to “No”.
Power On Link
CEC power on command
Mutual: Both projector and CEC device will be turned on `
simultaneously.
Some HDMI Link ™
functions may not
operate, depending
on the connected
product’s design
and compliance
with the HDMI CEC
standard.