NISSAN 2009 Rogue User Manual

Page 45

Black plate (44,1)

Model "S35-D" EDITED: 2008/ 7/ 24

SSS0100

Rear-facing

Follow these steps to install a rear-facing child
restraint using the vehicle seat belt in the rear
seat:

1. Child restraints for infants must be

used in the rear-facing direction and
therefore must not be used in the front
seat. Position the child restraint on the seat.
Always follow the restraint manufacturer’s
instructions.

SSS0654

Rear-facing — step 2

2. Route the seat belt tongue through the child

restraint and insert it into the buckle until you
hear and feel the latch engage. Be sure to
follow the child restraint manufacturer’s
instructions for belt routing.

SSS0655

Rear-facing — step 3

3. Pull the shoulder belt until the belt is fully

extended. At this time, the seat belt retractor
is in the Automatic Locking Retractor (ALR)
mode (child restraint mode). It reverts to the
Emergency Locking Retractor (ELR) mode
when the seat belt is fully retracted.

1-32

Safety — Seats, seat belts and supplemental restraint system