Subaru 2004 Impreza - Manual (Page 197)

4-8
Climate control
! Heating
To direct warm air toward the floor:
1. Set the air inlet selection lever to the “ ” po-
sition.
2. Set the air flow control dial to the “ ” position.
3. Set the temperature control dial to the most com-
fortable level.
4. Set the fan speed control dial to the desired speed.
NOTE
Warm air also comes out from the right and left air
outlets. To stop warm air flow from these outlets,
turn the corresponding knob clockwise.
! Bi-level heating
This setting allows you to direct air of different temper-
atures from the instrument panel and foot outlets. The
air from the foot outlets is slightly warmer than from the
instrument panel outlets.
1. Set the air inlet selection lever to the “ ” po-
sition.
2. Set the air flow control dial to the “ ” position.
3. Set the temperature control dial to the desired tem-
perature level.
4. Set the fan speed control dial to the desired speed.
Setting the temperature control dial fully turned to the
red area or blue area decreases the temperature dif-
UG4510AA UG4511AA