Cruise control – Subaru 2011 Impreza WRX User Manual
Page 308

Black plate (312,1)
北米Model "A1110BE-C" EDITED: 2010/ 12/ 17
7-44
Starting and operating
& Hill start assist warning light/
Hill start assist OFF indicator
light
Refer to
“Hill start assist warning light (MT
models
– if equipped)/Hill start assist OFF
indicator light (STI)
” F3-22.
Cruise control
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 25
mph (40 km/h) or more.
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
. driving up or down a steep grade
. driving on slippery or winding
roads
. driving in heavy traffic
NOTE
. If you press the “CRUISE” main
switch button while turning the ignition
switch
“ON”, the cruise control func-
tion is deactivated and the cruise
control indicator light flashes. To re-
activate the cruise control function,
turn the ignition switch back to the
“Acc” or “LOCK” position, and then
turn it again to the
“ON” position.
. Make sure the “CRUISE” main
switch is turned off when the cruise
control is not in use to avoid uninten-
tionally setting of the cruise control.
& To set cruise control
1. Push the
“CRUISE” main switch but-
ton.