Mercedes-Benz 2012 B Class - Manual (Page 199)

X Press : or 9 to select the
Speedometer [mph]: function.
You will see the selected setting: On or
Off .
X Press the a button to save the setting.
i Speed is displayed in mph.
The Speedometer [mph] function allows you
to choose whether the status area in the
multifunction display always shows the speed
in
mph instead of the outside temperature.
Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Inst. Cluster submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Permanent Display: function.
You will see the selected setting Outside
Temperature or Speedometer [km/h]
(USA)/ Speedometer [mph] (Canada).
X Press the a button to save the setting.
i The speed is shown in km/h (USA)/mph
(Canada).
Lights
Switching the daytime running lamps on/
off
Daytime running lamps are required by law
(Canada only). You cannot set the "daytime
running lamps" function via the on-board
computer.
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Daytime Running Lights function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y page 99).
Switching Adaptive Highbeam Assist on/
off
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Adaptive Highbeam Assist function.
You will see the selected setting: Enabled
or Disabled .
X Press the a button to save the setting.
For further information about Adaptive
Highbeam Assist, see (
Y page 102).
Setting the brightness of the ambient
lighting
X Press the = or ; button on the
steering wheel to select the
Sett menu.
X Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X Press the : or 9 button to select the
Amb. Light +/- function.
You will see the selected setting.
X Press a to confirm.
X Press the : or 9 button to adjust the
brightness to any level from
Off to Level
5 (bright).
X Press the a or % button to save the
setting.
Menus and submenus
197
On-board computer and displays
Z