Mercedes-Benz 2013 E Class Coupe - Manual (Page 152)

Problems with the "Cooling with air dehumidification" function
Problem Possible causes/consequences and M Solutions
The indicator lamp in
the ¿ button
flashes three times or
remains off. The
"Cooling with air
dehumidification"
function cannot be
switched on. Cooling with air dehumidification has been deactivated due to a
malfunction.
X Visit a qualified specialist workshop.
Setting climate control to automatic
General notes
In automatic mode, the set temperature is
maintained automatically at a constant level.
The system automatically regulates the
temperature of the dispensed air, the airflow
and the air distribution.
The automatic mode functions optimally
when the "Cooling with air dehumidification"
function is activated. If necessary, cooling
with air dehumidification can be deactivated.
If you deactivate the "Cooling with air-
dehumidification" function, the air inside the
vehicle will not be cooled. The air inside the
vehicle will also not be dehumidified. The
windows can fog up more quickly. Therefore,
deactivate the cooling with air-
dehumidification function only briefly.
Activating/switching
X Turn the SmartKey to position 2 in the
ignition lock ( Y page 159).
X Set the desired temperature.
X To activate: press the à button.
The indicator lamp above the à button
lights up. Automatic air distribution and
airflow are activated.
i 3-zone automatic climate control: when
automatic mode is activated, you can
select a climate mode (
Y page 150).
X To switch to manual mode:
Dual-zone automatic climate control: press
air distribution adjustment button
F(
Y page 145).
3-zone automatic climate control: press air
distribution adjustment button
I(
Y page 147).
The indicator lamp above the à button
goes out.
or
X Dual-zone automatic climate control: press
airflow adjustment button G(
Y page 145).
3-zone automatic climate control: press
airflow adjustment button H(
Y page 147).
The indicator lamp above the à button
goes out.
Adjusting the climate mode settings
The "Set climate mode" function is only
available with 3-zone automatic climate
control.
You can select the following climate mode
settings in automatic mode:
FOCUS
high airflow that is set slightly
cooler
MEDIUM medium airflow, standard setting
DIFFUSE low airflow that is set slightly
warmer and with less draft
150
Operating the climate control systems
Climate control