Calling up a stored setting, Seats, steering wheel and mirrors – Mercedes-Benz 2013 E Class Coupe User Manual
Page 128
G
WARNING
Children could become trapped if they
activate the memory function, particularly
when unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
active multicontour seat: seat contour,
dynamic function level
R
driver's side: position of the exterior
mirrors on the driver's and front-passenger
sides
X
X
On the driver's side, adjust the steering
wheel (
page 119) and the exterior mirrors
X
Press memory button
M and one of the
storage position buttons
1, 2 or 3 within
three seconds.
The settings are stored in the selected
preset position. A tone sounds when the
settings have been completed.
Calling up a stored setting
X
Press and hold the relevant storage
position button
1, 2 or 3, until the seat,
steering wheel and exterior mirrors are in
the stored position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
126
Memory function
Seats, steering wheel and mirrors