Safety, Driving safety systems – Mercedes-Benz 2013 M Class User Manual
Page 73

In appropriate driving situations, activate the
off-road program:
X
Vehicles without the ON&OFFROAD
package (
X
Vehicles with the ON&OFFROAD package
(
Off-road 4ETS (Electronic Traction
System)
A 4ETS system specifically suited to off-road
terrain is activated automatically once the off-
road program is activated on:
R
vehicles without the ON&OFFROAD
package (
R
vehicles with the ON&OFFROAD package
(
Important safety notes
G
WARNING
If ESP
®
is malfunctioning, ESP
®
is unable to
stabilize the vehicle. Additionally, further
driving safety systems are deactivated. This
increases the risk of skidding and an accident.
Drive on carefully. Have ESP
®
checked at a
qualified specialist workshop.
!
Vehicles with 4MATIC: only operate the
vehicle for a maximum of ten seconds on a
brake test dynamometer. Switch off the
ignition.
Application of the brakes by ESP
®
may
otherwise destroy the brake system.
!
Vehicles with 4MATIC: function or
performance tests may only be carried out
on a 2-axle dynamometer. Before you
operate the vehicle on such a
dynamometer, please consult a qualified
workshop. You could otherwise damage
the drive train or the brake system.
ESP
®
is deactivated if the å warning lamp
in the instrument cluster lights up
continuously when the engine is running.
If the ÷ warning lamp and the å
warning lamp are lit continuously, ESP
®
is not
available due to a malfunction.
Observe the information on warning lamps
(
page 321) and display messages which
may be shown in the instrument cluster
(
i
Only use wheels with the recommended
tire sizes. Only then will ESP
®
function
properly.
Characteristics of ESP
®
General information
ESP
®
is activated automatically when the
engine is started.
If ESP
®
intervenes, the ÷ ESP
®
warning
lamp flashes in the instrument cluster.
If ESP
®
intervenes:
X
Do not deactivate ESP
®
under any
circumstances.
X
Only depress the accelerator pedal as far
as necessary when pulling away.
X
Adapt your driving style to suit the
prevailing road and weather conditions.
ECO start/stop function
The ECO start/stop function switches the
engine off automatically when the vehicle
stops moving. The engine starts
automatically when the driver wants to pull
away again. ESP
®
remains in its previously
selected status.
Example: if ESP
®
was
deactivated before the engine was switched
off, ESP
®
remains deactivated when the
engine is switched on again.
Deactivating/activating ESP
®
Important safety notes
You can select between the following states
of ESP
®
:
R
ESP
®
is activated.
R
ESP
®
is deactivated.
Driving safety systems
71
Safety
Z