Driving systems, On-board computer and displays – Mercedes-Benz 2013 M Class User Manual
Page 330
Problem
Possible causes/consequences and M Solutions
X
Observe the additional display messages in the multifunction
display.
X
Pull over and stop the vehicle safely and switch off the engine,
paying attention to road and traffic conditions.
X
Secure the vehicle against rolling away (
X
Leave the vehicle and keep a safe distance from the vehicle until
the engine has cooled down.
X
Check the coolant level and add coolant, observing the warning
notes (
X
If you need to add coolant more often than usual, have the
engine coolant system checked.
X
Make sure that the air supply to the engine radiator is not
blocked, e.g. by snow, slush or ice.
X
At coolant temperatures under 248 ‡ (120 †), drive to the next
qualified specialist workshop.
X
Avoid subjecting the engine to heavy loads, e.g. driving in
mountainous terrain, and stop-and-go traffic.
Driving systems
Problem
Possible causes/consequences and M Solutions
·
The red distance
warning function
warning lamp comes on
while the vehicle is
moving. A warning tone
also sounds.
You are approaching a vehicle or a stationary obstacle in your line
of travel at too high a speed.
X
Be prepared to brake immediately.
X
Pay careful attention to the traffic situation. You may have to
brake or take evasive action.
Further information on DISTRONIC PLUS (
Further information on PRE-SAFE
®
Further information on the distance warning function
(
328
Warning and indicator lamps in the instrument cluster
On-board computer and displays