Saab 2006 9-7X - Manual (Page 50)

Fold down the head
restraint and route the
single tether under the
head restraint and in
between the head restraint
posts. See Rear Seat
Operation on page 1-6.
Fold down the head
restraint and route the
dual tether around the head
restraint. See Rear Seat
Operation on page 1-6.
3. Push and pull the child restraint in different
directions to be sure it is secure.
Securing a Child Restraint in a Rear
Outside Seat Position
If your child restraint is equipped with the LATCH system,
see Lower Anchors and Tethers for Children (LATCH) on
page 1-39.
If your child restraint does not have the LATCH system,
you will be using the lap-shoulder belt to secure the child
restraint in this position. Be sure to follow the instructions
that came with the child restraint. Secure the child in the
child restraint when and as the instructions say.
1. Put the child restraint on the seat.
2. Pick up the latch plate, and run the lap and shoulder
portions of the vehicle’s safety belt through or around
the restraint. The child restraint instructions will show
you how.
1-44