Mini 2010 Clubman User Manual

Page 89

If the rear seat backrests are positioned at
a steeper angle, do not install child-

restraint systems in the rear of the vehicle as
their protective features may be ineffective.

Partition net*

Ensure that the partition net is firmly
attached; otherwise, injuries may occur.

The partition net can be mounted in the cargo
bay or behind the front seats.

In the cargo bay

Fold the rear seat backrest forward if neces-
sary, page

Insert each partition net mounting pin all the
way into its respective rear mount in the
headliner, arrow 1, and push it forward.

Hang the hooks of the partition net into the
eyelets on the cargo bay floor, arrow 2.

Behind the front seats

Fold down the rear seat backrests, refer to
Expanding the cargo bay.

Insert each partition net mounting pin all the
way into its respective front mount in the
headliner, arrow 1, and push it forward.

Fold up the eyelets on the rear seat and
hook the partition net into them, arrow 2.

Level load floor*

The maximum load of the level load floor
is 165 lbs/75 kg. Do not exceed a maxi-

mum permissible load of 55 lbs/25 kg for the
storage compartment beneath the level load
floor; otherwise, damage can occur.

Raise the level load floor and fold it up toward
the front, arrow.

Removing

Fold up the level load floor.

Pull the load floor back slightly.

Then take it out toward the top.

Determining cargo limit

Locate the following statement on your
vehicle's placard

The combined weight of occupants
and cargo should never exceed

XXX kg or YYY lbs. Otherwise, the vehicle
may be damaged and unstable driving con-
ditions may result.