Central locking system, Opening and closing: from outside – Mini 2010 Clubman User Manual
Page 21

19
>
Settings for the displays in the speedometer
and tachometer:
>
12h/24h mode of the clock, refer to For-
mats and units of measure
>
Date format, refer to Formats and units
of measure
>
Units of measure for fuel consumption,
distance covered/remaining distances
and temperature, refer to Formats and
units of measure
>
Light settings:
>
Pathway lighting
>
Daytime running lights
>
Automatic climate control
*
: activating/
deactivating the AUTO program, setting the
temperature, air volume and air
distribution
>
Entertainment:
>
Audio volume, refer to separate Owner's
Manual
>
Speed-dependent volume, refer to sepa-
rate Owner's Manual
Central locking system
The concept
The central locking system is ready for operation
whenever the driver's door is closed.
The system simultaneously engages and
releases the locks on the following:
>
Doors
>
Splitdoor
>
Fuel filler flap
Operating from outside
>
Via the remote control
>
Via the door lock
*
>
In cars with Comfort Access
*
, via the door
handles on the driver's and passenger's
sides.
The anti-theft system is also operated at the
same time. It prevents the doors from being
unlocked using the lock buttons or door han-
dles. The remote control can also be used to
switch on/off the welcome lamps and interior
lamps. The alarm system
*
is also activated or
deactivated, page
Operating from inside
Button for central locking system, page
.
In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.
Opening and closing:
from outside
Persons or animals in a parked vehicle
could lock the doors from the inside. Take
the key with you when you leave the vehicle so
that the vehicle can be opened from the out-
side.
<
Using the remote control
Unlocking
Press the
button.
The welcome lamps and interior lamps come on.
Unlocking mode
You can also set which parts of the car are
unlocked. The setting is stored for the remote
control in use.
1.
Switch on the ignition, refer to page
2.
Briefly press the button in the turn indicator
lever repeatedly until "SET/INFO" is dis-
played.
Online Edition for Part no. 01 41 2 604 449 - © 02/10 BMW AG