Mini 2010 Clubman User Manual

Page 121

119

The Mobility System with tire change set and
onboard vehicle tool kit is located under the
floor mat or the level load floor in the cargo bay.

1 Compressor
2 Wheel stud wrench

3 Vehicle jack

4 Torx insert bit for screwdriver
5 Flat screwdriver/Phillips screwdriver, towing

eyelet

6 Extractor hook
7 Sealant bottle

Sealant and compressor

1 Sealant bottle and adhesive label with speed

limit

2 Filling hose

Note the use-by date on the sealant bot-
tle.

3 Holder for the sealant bottle
4 Compressor
5 Plug and cable for the socket in the vehicle

interior, page

6 Connection hose to connect the compressor

and sealant bottle or the compressor and
wheel

7 On/off switch
8 Pressure gauge for indicating the tire infla-

tion pressure

9 Release button for reducing the tire inflation

pressure

Connector, cable and connection hose are
stored in the compressor housing.

Using the Mobility System

To repair a tire puncture with the Mobility Sys-
tem, proceed as follows:

Filling the tire with sealant

Distribute the sealant

Correct the tire inflation pressure

Filling the tire with sealant

Proceed in the specified order; otherwise,
sealant may emerge under high pres-

sure.

Shake the sealant bottle.

Pull the connection hose 9 out of the com-
pressor housing fully and screw it onto the
connector of the sealant bottle. Make sure
that the hose is not kinked.

Insert the sealant bottle on the compressor
housing in an upright position.