Mini 2011 Clubman - Manual (Page 89)

87
AT
A
GL
A
N
C
E
REFERENC
E
M
OB
IL
ITY
C
O
NTROL
S
DRIV
ING
TIPS
CO
M
M
U
N
ICA
T
IO
N
S
By way of example, the illustration shows the
cargo compartment in the MINI.
1. Pull the lever.
2. Fold rear seat backrests forward.
When folding the backrest back up, make
sure that the seat's locking mechanisms
engage properly. Otherwise, cargo could be
thrown around in the event of sharp braking or
swerving and endanger the occupants.
<
Adjusting rear seat backrest*
Expand the cargo area by raising the split rear
seat backrests to a steeper angle.
By way of example, the illustration shows the
cargo compartment in the MINI.
1. Pull the lever, arrow 1, and fold the rear seat
backrest forward.
2. Fold up the lever of the backrest lock until it
audibly engages, arrow 2.
3. Fold back the backrest until it engages.
If the rear seat backrests are positioned at
a steeper angle, do not install child
restraint systems in the rear of the vehicle as
their protective features may be ineffective.
<
Partition net*
Ensure that the partition net is firmly
attached; otherwise, injuries may occur.
<
The partition net can be mounted in the cargo
area or behind the front seats.
In the cargo area
1. Fold the rear seat backrest forward if neces-
sary, page
87 .
2. Insert each partition net mounting pin all the
way into its respective rear mount in the
headliner, arrow 1, and push it forward.
3. Hang the hooks of the partition net into the
eyelets on the rear cargo well, arrow 2.
Behind the front seats
1. Fold down the rear seat backrests, refer to
Expanding the cargo area.
2. Insert each partition net mounting pin all the
way into its respective front mount in the
headliner, arrow 1, and push it forward.
3. Fold up the eyelets on the rear seat and
hook the partition net into them, arrow 2.
Online Edition for Part no. 01 40 2 605 226 - © 07/10 BMW AG Online Edition for Part no. 01 40 2 605 226 - © 07/10 BMW AG