Replacing components, On-board vehicle tool kit, Wiper blades – Mini 2011 Clubman User Manual
Page 129: Lamps and bulbs
127
CO
M
M
U
N
ICA
T
IO
N
S
Replacing components
On-board vehicle tool kit
Your vehicle comes with an onboard vehicle tool
kit that varies with the equipment version; it is
stored underneath the flat load floor.
>
Mobility System with onboard vehicle tool
kit and tire change set
*
>
Tire change set with onboard vehicle tool kit
for space-saver spare tire
Wiper blades
Changing the front wiper blades
1.
Fold up the wiper arm.
2.
Position the wiper blade horizontally.
3.
Press the securing spring, arrow.
4.
Unhook the wiper blade toward the wind-
shield.
5.
Pull the wiper blade past the wiper arm
toward the top.
6.
Insert the new wiper blade.
7.
Press into position until you hear it engage.
8.
Fold down the wiper arm.
To avoid damage, make sure that the
wiper arms are against the windshield
before you open the hood.
<
Changing the rear wiper blade
1.
Fold out the wiper arm and hold it.
2.
Press together the locking spring, arrow 1,
and fold out the wiper blade.
3.
Pull the wiper blade away from and out of
the catch mechanism, arrow 2.
4.
Press the new wiper blade into the fixture
until it engages audibly.
Lamps and bulbs
Lamps and bulbs make an essential contribution
to vehicle safety. They should, therefore, be
handled carefully. The manufacturer of your
MINI recommends having your MINI dealer per-
form any work that you do not feel competent to
perform yourself or that is not described here.
Never touch the glass of new bulbs with
your bare fingers, as even minute
amounts of contamination will burn into the
bulb's surface and reduce its service life. Use a
clean tissue, cloth or something similar, or hold
the bulb by its base.
<
You can obtain a selection of replacement bulbs
at your MINI dealer.
Online Edition for Part no. 01 40 2 605 226 - © 07/10 BMW AG
Online Edition for Part no. 01 40 2 605 226 - © 07/10 BMW AG