Lenco Walky Box - Manual (Page 13)

12
Before enjoying DVD/Video CD/CD
The On-Screen menu language of your
player has been factory pre-set to
Dutch.
If you want to change the menu language
to other language, please refer to "Initial
settings / General setup / OSD lang”
In the explanation below it is assumed that
English has been selected as menu language.
Basic play
1. Push POWER knob on the unit to switch
on the power.
2. Push the open button to open the disc cover.
3. Place a disc onto the disc compartment.
Hold the disc without touching either of its
surfaces, position it with the printed title side
facing up, align it with the guides, and place it
in its proper position.
4. Close the disc cover, after closing the disc
cover , play begins. The player starts to read
the disc immediately.
5. When a menu screen appears on the TV, move the navigation buttons or press the numeric buttons
to select preferred track number, then press ENTER button to confirm.
6. When the menu continues onto another screen, press NEXT button to view the next screen, or press
PREV button to skip to previous screen.
NOTE: Due to the different design of some software titles, NEXT button may not always work.
7.To stop play and return to the menu screen, press TITLE button, or MENU button.
Open
LOADING DVD-VIDEO