Lenco LED-3901 - Manual (Page 33)

EN 33
Notes:
• Time Shift Mode and Recording functions may not work if the signal strength is
weak.
• Stop the time-shift function before switching to another input source.
• If the transfer rate of the USB storage device is too slow for recording or time shift
function, a warning statement will be shown on the screen. If this happens, please
upgrade your USB storage device.
This function allows the TV to virtually record the live viewing broadcast programme.
Before using Time Shift fuction, please make sure the USB device is inserted.
Time Shift Function (DTV Mode)
PVR (Personal Video Recorder)
During normal TV viewing, you may press the TIMESHIFT button to virtually pause
the live viewing broadcast programme if you want to go out for a while (e.g. going to
the bathroom / kitchen). “ ” will show on the screen and the LED indicator flash red
and blue alternately.
When you have returned, press the button to play the missed broadcast
programme. “ ”will show on the screen.
Alternative: Press the TIMESHIFT button to display the PVR Time Shift progress bar
and then press the buttons to select “Play” on the bar. Press the OK button to
confirm.
The video and sound may have a little bit of delay or be out-of-sync for a few
seconds when the unit starts to playback the missed broadcast programme. It will
soon switch to normal.
04:20
Shift Time/Max Shift Time (-00:00:09/01:20:00)
Play FB FF Prev. Next Pause Stop