Lenco LED-3901 - Manual (Page 26)

EN 26
• Press the MENU button to display the main menu. Press the buttons to
select OPTION and then press the OK button.
• Press the buttons to select the option you want to adjust in OPTION menu.
• Press the buttons to adjust each option’s setting.
• Press the EXIT button to exit the menu.
Option Settings
OSD Language
Allows you to select your desired on-screen menu
language.
Audio Languages 1st /
2nd
Allows you to select your desired primary or secondary
audio language. (Available for digital channels if multiple
audio languages are broadcast.)
Subtitle Language 1st /
2nd
Allows you to select your desired primary or secondary
subtitle language. (Available for digital channels if
multiple subtitle languages are broadcast.)
OSD Duration
Displays time of the on-screen menu: 5s / 10s / 15s / …
/ 35s / 40s.
Blue Screen
Allow the blue background to turn on/off during weak or
no signal conditions.
Back Light Adjust brighness of the back light
Country Selects the country where you will operate the TV. The
default country is set as Sweden.
HDMI CEC control DVD through TV remote control
CEC Device Auto Turn
Off
“Select ON mode of this option, the CEC devices connect to the
TV will also turn off automatically when the TV
is off “
TV Auto Power On
Select ON mode of this option, the TV will turn on automatically
when the CEC devices are on
Root Menu
The DVD will show it’s root menu,when select this
option(this option can only be selected in HDMI source)
MEMC
The function control the MEMC of the picture, press the
button to select the MEMC mode: Off/Low/Middle/
High.
Dynamic CR Dynamic luminance control ON or OFF
Energy Mode
Selects your desired mode setting.
Home Mode: Viewing at home.
Store Mode: For store demo, the brightness is higher
than home mode.
R e s t o r e F a c t o r y
Default
Resets all settings to the factory defaults.
CUSTOMIZING TV SETTINGS