Lenco LED-3901 - Manual (Page 27)

EN 27
• Press the MENU button to display the main menu. Press the buttons to
select LOCK and then press the OK button.
• Use the 0-9 buttons to input a 4-digit password to enter the LOCK menu. Enter
the default password “0000” for the first time use.
• Press the buttons to select the option you want to adjust in LOCK menu.
• Press the buttons to adjust each option’s setting.
• Press the EXIT button to exit the menu.
Lock Settings
Enable Locks
The Enable Locks is designed to prevent accidental
returning of the TV / losing channels and prevent
children watching unsuitable programme.
The Enable Locks must be set to On for this function
to operate. If the Enable Locks is set to On, a valid
password must be entered when you access Auto Scan
/ Manual Tuning / Programme Edit / Restore Factory
Default.
Set Password
Use the 0-9 buttons to input the old password and then
input the new 4-digit password. Re-enter new password
for confirmation.
Note: the default password is “0000”.
Block Program
Block Program is designed to prevent children watching
unsuitable programmes. When a channel is blocked, a
valid password must be entered.
Parental Guidance
This function allows you to set up blocking schemes
to block specific channels and ratings. Press the
buttons to select an age rating: Off, 4-18.
CUSTOMIZING TV SETTINGS
Hotel Setting
Hotel Lock
Hotel Lock On will cause all the following settings to be
enabled.
Hotel Lock Off will cause all the following settings to be
disabled.
Channel Lock
The CHANNEL in the main meun can't be selected,when set it
to on