Lenco LED-2411 - Manual (Page 16)

15
PC ˄When signal source is PC˅
1. Press the “MENU” button to enter the OSD menu. Then press “ e/f button to select the
“PICTURE” menu. Press “ c/d” button to select “PC Setup”. Enter the “PC Setup” menu by
pressing “ f” or “ENTER” button.
2. Press “ c/d” button to select “Auto Adjust” menu and press the “f button or “ENTER” button
to do auto adjustment.
3. Press “ c/d” button to select “Horizontal Pos.” and press the “e/f” button to adjust.
4. Press “ c/d” button to select “Vertical Pos.” and press the “e/f” button to adjust.
5. Press “ c/d” button to select “Size” and press the “e/f” button to adjust.
6. Press “ c/d” button to select “Phase” and press the “e/f” button to adjust.
DTV CHANNEL
1. Press the “MENU” button to enter the OSD menu.
Then press “ e/f” button to select the
“CHANNEL” menu. Enter the “CHANNEL” menu
by pressing “ d” button or “ENTER” button.
2. Press “ c/d” button to select “Auto Scan” and press
the “ f” button or “ENTER” button to do auto
search. Press “MENU” button to return the previous
menu. Press “EXIT” button to exit.
Note: Searching for platform will take a long time ,
please be patient!
3. Press “ c/d” button to select “DTV Manual Scan” and press the “f” button or “ENTER”
button to do DTV manual search. Press “MENU” button to return the previous menu. Press
“EXIT” button to exit the menu.
4. Press “ c/d” button to select “ATV Manual Scan” and press the “f” button or “ENTER”
button to do ATV manual search. Press “MENU” button to return the previous menu. Press
“EXIT” button to exit the menu. Press “RED” button to save the program (This function is
only used for ATV source ).
5. Press “ c/d” button to select “Programme Edit” and press the “f” button or “ENTER” button
to enter.
6. Press “ c/d” button to select “PVR File System” and press the “f” button or “ENTER”
button to enter.