Lenco LED-2411 - Manual (Page 12)

11
color temp.
9. Press “ c/d” button to select “Red” and press the “e/f” button to adjust.
10. Press “ c/d” button to select “Green” and press the “e/f” button to adjust .
11. Press “ c/d” button to select “Blue” and press the “e/f” button to adjust .
12. Press “ c/d” button to select “Aspect Ratio” and press the “e/f” button to select the size
which you desire.
Note: When the current source is “PC”, the “Aspect Ratio” item only has two options for
“16:9” and “4:3”.
13. Press “ c/d” button to select “Noise Reduction” and press the “e/f” button to select open or
close the noise reduction function .
SOUND
You can select the type of sound, which best
corresponds to your listening.
1. Press the “MENU” button to enter the OSD
menu. Then press “ e/f” button to select the
“SOUND” menu. Enter the “SOUND” menu
by pressing “ d” button or “ENTER” button.
2. Press “ c/d” button to select “Sound Mode”
and press the “ e/f” button to select the
sound mode.
3. Press “ c/d” button to select “Treble” and
press the “ e/f” button to adjust.
4. Press “ c/d” button to select “Bass” and press the “e/f” button to adjust.
5. Press “ c/d” button to select “Balance” and press the “e/f” button to adjust.
6. Press “ c/d” button to select “Auto Volume” and press the “e/f” button to select “On” or
“Off” .This reduces the effect of sudden changes in volume of the source.
7. Press “ c/d” button to select “Surround Sound” and press the “e/f” button to select
“Surround” or “Off”.
Note: This creates a surround sound effect, but is not true surround sound.
TIME
1. Press the “MENU” button to enter the OSD
menu. Then press “ e/f” button to select the
“TIME” menu. Enter the “TIME” menu by
pressing “ d” button or “ENTER” button.
2. Press “ c/d” button to select “Clock” and
press the “ f” button or “ENTER” button to
enter to setup the local time.