Lenco EB-900 - Manual (Page 6)

Inserting Memory Card
The Reader supports SD card in both FAT and NTFS file system. NTFS is
needed to copy files larger than 4GB in size.
To insert a Memory card:
• Check ifthe TF card is in the correct position with the contact pins
facing upwards as illustrated below. You may damage the card and
the reader if TF card is not inserted in the correct position.
• Push the TF card into the card slot until it clicks.
• To remove the TF card, push the TF card once again until it clicks.
• When a TF card is inserted in or ejected from the reader, it may
take few seconds for the reader to update the content.
• Please avoid inserting or ejecting a TF card when another
operation is running as this may cause a systemcrash.
• Do not remove the card if the content of the card is being played.
This will halt the operation and causes a restart of the reader.
• If the system is not responding, press and hold the
button for 6 seconds to reset and turn the reader on.
Limitations with the NTFS file system:
• eBooks on the card are not recognized by Adobe Digital Editions
when connected to PC.
• Direct copy of files from internal memory to the card is not
supported.
Getting Started 4