DeVillbiss Air Power Company Water Driver WD1600E User Manual
Page 4
4- ENG
D28921
• Your washer operates at fluid pressures and
velocities high enough to penetrate human and
animal flesh, which could result in amputation or
other serious injury. Leaks caused by loose fittings
or worn or damaged hoses can result in injection
injuries. DO NOT TREAT FLUID INJECTION AS A
SIMPLE CUT! See a physician immediately!
RISK TO FLUID INJECTION
DANGER
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Injuries can result if system pressure is not
reduced before attempting maintenance or
disassembly.
• To relieve system pressure, place on/off switch in
off position, turn off water supply, and pull gun
trigger until water stops flowing.
• Use only hose and high pressure accessories
rated for pressure higher than your pressure
washer's p.s.i.
• Never place hands in front of nozzle.
• Do not direct discharge stream at persons or
animals.
• Make sure hose and fittings are tightened and in
good condition. Never hold onto the hose or
fittings during operation.
• Do not operate pressure washer with worn or a
braided hose.
• Never attach or remove wand or hose fittings
while system is pressurized.
RISK OF CHEMICAL BURN
DANGER
WHAT CAN HAPPEN
HOW TO PREVENT IT
• Do not use acids, gasoline, kerosene, or any
other flammable materials in this product. Use
only household detergents, cleaners and
degreasers recommended for use in pressure
washers.
• Wear protective clothing to protect eyes and
skin from contact with sprayed materials.
• Use of acids, toxic or corrosive chemicals,
poisons, insecticides, or any kind of flamma-
ble solvent with this product could result in
serious injury or death.
• Unsafe operation of your pressure washer
could lead to serious injury or death to you or
others.
• Do not use chlorine bleach or any other
corrosive compound.
• Become familiar with the operation and con-
trols of the pressure washer.
• Keep operating area clear of all persons,
pets, and obstacles.
• Do not operate the product when fatigued or
under the influence of alcohol or drugs. Stay
alert at all times.
• Never defeat the safety features of this prod-
uct.
• Never leave wand unattended while unit is
running.
• Know how to stop product and bleed
pressure quickly.
RISK OF UNSAFE OPERATION
WHAT CAN HAPPEN
HOW TO PREVENT IT
DANGER