Lenco BTT-2 - Manual (Page 11)

11
14. USB port, insert a USB storage device in this port.
WARNING: Do not use a USB extension cable to
connect a USB device. The use of a USB
extension cable can cause malfunction or loss of
data.
15. AUX INPUT, connect a device that is equipped with an
AUX output or headphones output to this input.
16. Wire antenna, the antenna receives the FM radio
signals.
17. Power on / off switch, set the switch in the OFF
position to switch off the device. Set the switch in the ON
position to put the device in standby mode.
18. AC connection, connect the power cord to this
connection.